Vango Fibreglass Pole 12.7mm - 1 x 65cm length pole

Our opinion:-

Essential for spares or repairing your damaged Fibreglass Poles.

Most manufacturers do not warranty fibreglass poles. The biggest problem with Tents & Awnings that have a fibreglass poled frame is they break. This can be the 1st time you use your tent or awning or after many uses. This can be while just pitching your tent or awning or as the result winds. The main issue with fibreglass poles is the hole in the centre of the pole not being central. This occurs during manufacture. This can cause the pole to split when pitching the tent as you put tension on the pole, if the central hole is off centre, there is less fibreglass in one direction and so a weakness in the pole. Depending on the position this weakness ends up when tensioning the pole, it can split , and is the biggest problem the first few times you pitch your tent or awning. Storm damage to fibreglass poles is self explanatory. 

A Broken pole is going to ruin your holiday, so always carry one or two spares and know how to change a pole. All you need is Junior Hacksaw to cut the pole to size. We have produced a handy guide to changing a fibreglass pole which is available on the following link Changing a fibreglass pole

What the manufacturer says:-

A Replacement Fibreglass pole section, tough, durable fibreglass pole which is guaranteed to be dependable in most weather conditions.  - just in case, because at Vango we like to have everything covered!

 Suitable for all fibreglass tent poles with a diameter of 12.7mm. Will need to be cut to length.

1 x 12.7mm Fibreglass Pole 65cm long